|
CARDS
|
|
 |
|
TX1-B-429-42
Interface Card
with dual redundant MIL-STD-1553B
and ARINC 429
(Standard Eurocard-6U board)
- Size - 160 x 233 x 20 mm;
- Up to four SI (1...4) programmable receive channels;
- Up to two SO (1...2) programmable transmit channels;
- Nominal Data Rate:
Input SI : (12...14,5) kHZ, 48 kHz +/- 25%, 100 kHz +/- 1%;
Output SO : 12,5 kHz +/- 1%, 50 kHz +/- 1%, 100 kHz +/- 1%.
- Impedance of input/output channel:
Input: Rn > 20 kOhm; Cn < 10 pF;
Output: Rn > 600 kOhm; Cn < 10 pF;
- Uses 2 interrupt levels;
- Time tag resolution: 1 us;
- 32K RAM for Real-Time Data;
- Receive or Transmit Programmable Parametric Channels;
- Six Programmable Parametric Channels:
Receive or Transmit;
High, Low, Variable speed;
Transmitters or receivers can be configured appropriate parity (EVEN/ODD/NONE);
- Receive: two addressing mode;
- Receive: scheduled interruption;
- After transmission of last word interruption can be generated;
- 1 Input Discretes DI(1) and 1 Output Discretes DO(1);
- Parameters Receive Discretes (DI RK, DINT1):
absence of 2,4 V...35 V or no signal;
presence of signal (0,22 +/- 0,22) V;
minimum time of discrete signal T => 1 us;
- Parameters Transmit Discretes (DO RK):
signal "O"- U < 27 V; signal "1" - U < 0.7 V at I < 16 mA;
- Programmable control Rx/Tx Channels and Discretes;
- Typical operating Current:
0.350 A at +5 VDC +/- 5%;
0.100 A at +12 (15) VDC +/- 10 %;
0.750 A at -12 (15) VDC +/- 10 %;
MIL-STD-1553B
- The TX1-B-429-42 provides an intelligent interface between an ISA bus and MIL-STD-1553B BUS for operation as a Bus Controller, Single Remote Terminal, Monitor Terminal;
- The TX1-B-429-42 provides comprehensive 1553 error detection capabilities;
- The TX1-B-429-42 may be programmed to process BC frames with no processor intervention;
- 16K x 16 Shared RAM;
- Support all 1553B message formats and mode codes;
- Up to four TX1-B-429-42 boards into one PC.
|
|